|
ClackaCraft Models
|
The
16' Steelheader is designed around
the concept of bait fishing
and pulling plugs.
|
The oarsman may be accompanied by up to three passengers on
the front bench seat. Typically everyone will have their rods
in rod holders. Both the front passenger bench seat and the oarsman
bench seat are fully adjustable for fore-aft trim regardless
of loading and distribution of weight. The rowing bench seat
comes standard with a comfortable padded white tractor seat.
Optional padded swivel bucket seats on side to side adjustable tracks make the front bench seat very comfortable for up to three passengers. The tracks allow side to side weight distribution, placing the heavier person toward the center and the lighter person further toward the side of the boat. This makes the boat much easier for the oarsman to control.
Optional front under seat storage and optional rear under bench seat storage provides a large amount of dry storage volume, removing clutter from the floor of the boat.
(front-rear seat adjustment
mechanism
shown in photo not available on Steelheader)
|
NEW
Molded-in Rod Storage!
Comes as Standard Equipment.
|
|
OPTIONAL:
STORAGE UNDER FRONT BENCH SEAT, SWIVEL
SLIDING SEATS, FOOT ANCHOR RELEASE SYSTEM (SHOWN)
|
Your choice of optional foot release or deluxe side pull anchor
systems are available. When running a motor the tail drop anchor
bracket quickly comes off with the removal of two 3/8" nuts.
An optional bow drop can be installed quickly with 1/4" hardware.
For a complete list of available options, visit the Accessories
page.
Now with the ClackaCraft Tunnel
Hull!
ClackaCraft has incorporated a patent pending, computer-designed
tunnel in the all-new design. The tunnel has been formed in the
bottom to reduce the pushing effect of the current. As the water
rushes down the tunnel it provides dynamic lift from the water
pressure exiting a 1" x 12" x 3' diminishing tunnel,
beneath the boat. Three reverse keel tracking channels help keep
your ClackaCraft drifting in a straight line. A very slight bottom
vee up front, under the passengers feet, helps to reduce the
water slapping noise. The nose of the boat is rounded off so
not to block the oarsman's vision down stream. The Front Bench
(FB) is very easy to maneuver due to the rounded chine and is
easy for the oarsman to hold so anglers can work the best fly
fishing water.
Your choice of foot release and deluxe side pull
anchor systems are available. Visit the Accessories
page.
Standard Equipment:
- Front deck with leg brace
- Under deck gear storage
- Rolled gunwale edge
- Adjustable front bench passenger seat
- Oarsman's adjustable rowing bench seat with comfortable
tractor seat
|
- Three sets of raised oarlock positions
- Adjustable foot brace
- Front loading storage at rear
- Two drain plugs
|
View
all of the available accessories!
Call us to order: (800) 394-1345
Specifications
16' x 57"
- Centerline 16 foot
- Gunwales 17 foot 4 inches
- Beam 83 inches
- Oar Lock Height 25 inches
|
- Bottom Width 57 inches
- Side Height 23 inches
- 4 Person Capacity
|
Call us to order: (800) 394-1345
|
